Mobotix D26 Dome - Additional Notes; Password for the Admin Menu; Permanently Deactivating the Microphone; Using the Start Options of the Camera

102
D26 Camera Manual: Operating the Camera
3.7 Additional Notes
3.7.1 Password for the Admin Menu
Accessing the Administration Menu of the camera (Admin Menu sobutton) is only possible
aer entering a user name and password.
• Factory default user name is
admin .
• Factory default password is
meinsm .
(Note that you need to change the password upon your rst login – camera release V5.1.x
and higher.)
The Quick Installation assistant automatically appears when the Administration Menu is
accessed for the rst time. It provides an easy method to adjust the basic camera settings to
the current application scenario. For security reasons, we highly recommend changing the
default administrator password aer the camera has been properly congured.
Enter the user name and password exactly as shown above. Note that all entries are case-sen-
sitive.
Caution
Make sure that you store information on user names and passwords in a secure place.
If you lose the administrator password and cannot access the administration menu,
the password can only be reset at the factory. This service is subject to a fee!
3.7.2 Permanently Deactivating the Microphone
Deactivating a camera’s microphone may be necessary in order to protect the privacy of
persons at a workplace or for other reasons. You can permanently and irreversibly deactivate
the microphone in the Admin Menu > Loudspeaker and Microphone dialog box.
Caution
This deactivation occurs in the camera module itself and cannot be reversed, even
at the factory. Deactivating the microphone will also deactivate all functions that are
making use of the microphone.
3.7.3 Using the Start Options of the Camera
• To reset the camera to factory settings and to use the factory IP address, please use
start option 2 as described in Section 3.2.4, «Start Options of the Camera».
• To start the camera as a DHCP client and to automatically obtain an IP address,
please use start option 3 as described in Section 3.2.4, «Start Options of the Camera».
The microphone can be
irreversibly deactivated!