28
D26 Camera Manual: Installation
2 INSTALLATION
Although the MOBOTIX D26 has been primarily designed for installation on walls and ceil-
ings, it can also be mounted to a pole or the corner of a building, for example, using the
appropriate MOBOTIX accessories.
2.1 Preparing the Installation
Before installing the MOBOTIX D26, the following questions should be answered:
1. Where will the camera be mounted?
Mounting to a ceiling or wall, see Section 2.1.1, «Ceiling and Wall Mounting»
2. Which other mounting options are available?
On-wall mounting, in-ceiling mounting, vandalism protection, wall mounting, pole
mounting, see Section 2.1.2, «Mounting Options»
3. How is the camera connected to the network and how is the power supplied?
MX-NPA-PoE or other PoE components (IEEE 802.3af), see Section 2.1.3, «Network
Connection and Power Supply, UPS»
4. How are the connections furnished from the building?
Sockets, see Section 2.1.4, «Preparing the Camera Connections, MX-Overvoltage-Protection-
Box»
5. What cabling considerations are necessary?
Wiring, see Section 2.1.5, «Wiring, Fire Prevention, Lightning and Surge Protection»
The following sections contain a brief answer to each of these questions, as well as references
to the relevant sections in this manual. For more information on the MOBOTIX D26 and
available accessories, please see www.mobotix.com.
To Next Page
Loading...
