Mobotix D26 Dome - Cleaning the Camera and Lens; Online Help in the Browser; Declaration of Conformity; Rohs Declaration

104
D26 Camera Manual: Operating the Camera
3.7.8 Cleaning the Camera and Lens
If the lens becomes dirty during the installation process, clean the lens using a lint-free cotton
cloth. Make sure that the lens is still in focus aer cleaning and adjust its focus if required.
Cleaning the Lens Cover:
• Always mount and unmount the lens cover using a so cotton cloth in order to protect
it from being scratched and from getting dirty.
• You should clean the lens cover at regular intervals. Always use a so, lint-free cotton
cloth for this purpose.
•
If the dirt is more persistent, add a mild alcohol-free detergent without abrasive particles.
• Make sure you instruct cleaning personnel on how to clean the camera.
3.7.9 Online Help in the Browser
For more information, see the News and Functional Overview pages in the online help of
the camera’s browser interface. Click on the
icon to open the camera’s online help.
Furthermore, detailed information on the camera and its current conguration is displayed
in the Camera Status dialog box. Click on the
icon to open the relevant page.
3.7.10 Declaration of Conformity
The products of MOBOTIX AG are certied according to the applicable directives of the E.U. and
other countries. You can nd the declarations of conformity of the products of MOBOTIX AG
under www.mobotix.com, Support>DownloadCenter>Documentation>Certicates
& Declarations of Conformity.
3.7.11 RoHS Declaration
The products of MOBOTIX AG are in full compliance with Art. 5 of the German Electrical and
Electronic Equipment Act and the E.U. Directive 2011/65/EU on the Restriction of the Use
of Certain Hazardous Substances in Electrical and Electronic Equipment (RoHS) as far as
they are subject to these regulations. (You can nd the MOBOTIX RoHS Declaration under
www.mobotix.com, Support > Download Center > Documentation > Certicates &
Declarations of Conformity.)