Mobotix D26 Dome - Replacing the Microsd Card; Removing the Microsd Card

63
Replacing the MicroSD Card
2.8 Replacing the MicroSD Card
The camera must be taken down to remove, insert or replace
a MicroSD card. To avoid data loss, be sure to deactivate
MicroSD card recording in the camera soware and reboot
the MOBOTIX camera before removing the card.
Caution
A MicroSD card may only be removed from the camera aer you have deactivated
Recording to SD Card and rebooted the camera. Failing to do so may lead to loss of
data! Make sure that the card is not write-protected!
2.8.1 Removing the MicroSD Card
• Deactivate recording: Recording to MicroSD card must be
deactivated (Admin Menu > Storage on External File
Server / Flash Device). If MicroSD card recording is still
active, deactivate recording and reboot the camera.
Section 3.5, «MicroSD Card Recording», contains more infor-
mation on this topic.
• Remove the outer shell: Remove all four Allen screws using
the supplied Allen wrench. Take o the outer shell.
• Remove the camera dome. Take the delivered plastic foil or
a cotton cloth and remove the dome by turning it in count
-
er-clockwise direction.
•
Remove the MicroSD card: Gently push the MicroSD card into
the card slot of the camera. The card is released from the slot
and can be removed from the camera.
Push-Push operation:
Gently push MicroSD card
once, then pull it out.
Click!