Mobotix D26 Dome - MX-Overvoltage-Protection-Box; MX-NPA-Box; MX-GPS-Box

22
D26 Camera Manual: Product Overview
1.5.14 MX-Overvoltage-Protection-Box
Order no.: MX-Overvoltage-Protection-Box-RJ45
Order no.: MX-Overvoltage-Protection-Box-LSA
Weatherproof network connector (protection class
IP65, –30 to 60 °C/–22 to 140 °F)
with surge protec-
tion of up to 4 kV for MOBOTIX IP cameras , ideal
for replacing the MX-Patch-Box.
At the same time, the MX-Overvoltage-Protection-Box
provides a weatherproof connection of a camera’s
patch cable to a network patch cable ( -RJ45 variant)
or a network installation cable ( -LSA variant).
1.5.15 MX-NPA-Box
Order no.: MX-OPT-NPA1-EXT
The MX-NPA-Box is a weatherproof PoE injector con-
forming to the IEEE 802.3af standard and is designed
to connect external voltage sources (12 to 57 V DC)
to a MOBOTIX camera.
The MX-NPA-Box is equipped with the Patch-Box’s
weatherproof and extremely compact exterior hous-
ing (protection class IP65, –30 to 60 °C/–22 to 140 °F),
which means it can also be installed in the space of
the Outdoor Wall Mount. Interfaces of the MX-NPA-
Box: Camera via patch cable, Ethernet via LSA+ and
external power supply via terminal connector (12 to
57 V DC possible).
1.5.16 MX-GPS-Box
Order no.: MX-OPT-GPS1-EXT
The MX-GPS-Box primarily serves as a high-preci -
sion time source for systems without an Internet
connection. In addition, it can provide trigger-
ing based on GPS events (reaching or moving
away from a specied position; exceeding or not
reaching a specied speed). This interface box
can be attached to all MOBOTIX cameras with
an MxBus interface.
The MX-GPS-Box is equipped with the same compact housing as the other interface boxes
(protection class IP65, –30 to 60 °C/–22 to 140 °F). This interface box should not be installed
inside of other wall mounts, but on the exterior of the building with a large section of open