30
D26 Camera Manual: Installation
Wall Installation Using the Outdoor Wall Mount
Outdoors, the D26 is usually mounted on a building wall. In principle, the camera can be
installed without additional wall mounts, although the positional range of the lens may be
limited as a result. We therefore recommend using the practical Wall Mount from the range
of available accessories (see Section 2.6, «Installing the Wall Mount»). The cable exit of the
D26 is located in the center of the housing’s underside. For more detailed information on
the installation process, see Section 2.2, «Mounting the Camera Without Accessories» and the
following sections.
A HiRes MOBOTIX Camera Can Replace Up To 6 Conventional Cameras
One Camera For 4 Gas Pumps - Long-Term Recording Without Peripheral Devices
To Next Page
Loading...
