44
Table of Contents
2 Installation 28
2.1 Preparing the Installation 28
2.1.1 Ceiling and Wall Mounting 29
2.1.2 Mounting Options 31
2.1.3 Network Connection and Power Supply, UPS 34
2.1.4 Preparing the Camera Connections, MX-Overvoltage-Protection-Box 35
2.1.5 Wiring, Fire Prevention, Lightning and Surge Protection 36
2.2 Mounting the Camera Without Accessories 38
2.2.1 Mounting Instructions 38
2.2.2 Procedure for Installing the D26 Without Accessories 40
2.3 Mounting the Camera with the On-Wall Set 41
2.3.1 Mounting Instructions 41
2.3.2 Procedure 44
2.4 Mounting the Camera with the In-Ceiling Set 46
2.4.1 Mounting Instructions 46
2.4.2 Procedure 49
2.5 Installing the Vandalism Set 51
2.5.1 Mounting Instructions 51
2.5.2 Procedure 52
2.6 Installing the Wall Mount 54
2.6.1 Mounting Instructions 54
2.6.2 Procedure 56
2.7 Installing the Corner and Pole Mount 58
2.7.1 Mounting Instructions 58
2.7.2 Mounting to a Pole 60
2.7.3 Mounting to a Wall or Building Corner 61
2.7.4 Mounting the Wall Mount to the Corner and Pole Mount 62
2.8 Replacing the MicroSD Card 63
2.8.1 Removing the MicroSD Card 63
2.8.2 Inserting the MicroSD Card 64
2.9 Network and Power Connection 65
2.9.1 Notes on Cable Lengths and Power Supply 65
2.9.2 Network Cabling For D26 With Patch Cables 65
2.9.3 Power Supply Using a Switch 66
2.9.4 Power Supply When Connected Directly to a Computer 67
2.9.5 Power Supply with Power-Over-Ethernet Products 67
2.9.6 Connecting a USB Cable 68
2.9.7 Connecting a Two-Wire MxBus Cable 69
2.9.8 Variable PoE 71
To Next Page
Loading...
