Mobotix D26 Dome - Page 73

73
Manual and Automatic Operation – Overview
• Network with xed IP addresses
In order to access the camera, it must have an IP address within the range of the local
network. To set the camera’s network parameters, you can use one of these methods:
– Manually using a browser:
First, you need to change the network parameters of your computer (see Section 3.2.1,
«Manually Setting Up the Network Parameters in a Browser» and following …).
– Integration into MxManagementCenter with automatic adjustment of the cam
-
era’s IP address:
The camera is displayed in MxManagementCenter despite the fact that the IP address
is not part of the local network. The application allows reconguring the network
parameters accordingly (see Section 3.2.3, «First Images and Network Parameter
Conguration in MxMC»).
3. Congure the camera.
Using the web-based user interface or MxManagementCenter.
Camera soware
in the browser