Camera Software in the Browser
Configuring Sensor Modules
NOTE!
Open the Image Sensor Configuration dialog in the following cases:
n
Switching the displayed camera images: You want to show the left-hand camera image on the
right (and vice versa), without having to physically swap the module connectors at the camera itself.
n
Exchanging sensor modules: In this case, the MOBOTIX M73 will display a message box and will log
a system message to inform you that sensor modules have been exchanged (see also Installing the
Sensor Modules to the Thermal Front Plate, p. 55).
n
Adding/activating sensor modules: You can activate modules that had been deactivated before.
n
Switching off/removing sensor modules: If required, you can deactivate connected modules in this
dialog.
For more information, consult the Reference Manual of the camera.
103 / 110
To Next Page
Loading...
