Maintenance
Cleaning the Camera and Lenses
6. Close the camera body: (see Finishing the Installation of the Camera, p. 82).
7. Activate storage: If the microSD card already is formatted with MxFFS has been inserted, storage can be
activated in Admin Menu > Storage on External File Server/Flash Device. After rebooting the camera,
recording is activated automatically. .
Cleaning the Camera and Lenses
Clean the camera housing using a mild alcohol-free detergent without abrasive particles.
To protect the lens protection glass, only use the supplied mounting supplies (see Mounting Supplies: Scope
of Delivery, p. 20).
Cleaning the lens protection glass
n
Use the wide end of the gray module wrench M.1 to remove/install the lens protection glass. The nar-
row side of the wrench is used to adjust the sharpness (focal length) of the tele lenses.
n
You should clean the lens protection glasses and domes regularly using a clean, lint-free cotton cloth. If
the dirt is more persistent, add a mild alcohol-free detergent without abrasive particles.
n
Make sure you instruct cleaning personnel on how to clean the camera.
109 / 110
To Next Page
Loading...
