Mounting
Connecting the camera
Fig. 51: Power supply using PoE switch according to PoE Plus (802.3at-2009).
Network connection with the Connector Box LSA
An Connector Box LSA is required to connect the camera to the network, to supply power via PoE and to pro-
tect the camera from electrical surge. The Connector Box LSA is not part of the scope of delivery (see
Delivered Parts and Dimensions) and must be ordered in addition to the camera.
Fig. 52: Connector Box LSA with rubber plug black C.3 ① , rubber plug single-wire C.4 ② , USB plug ③ and two blue locks
71 / 110
To Next Page
Loading...
