77
Virtual PTZ and Full Image Recording
Wall-Mounted: Setting and Correcting the Standard View ”Panorama”
High-resolution 180° panorama
High-resolution 180° panorama
1. In the Display Mode Quick Control, select the option Panorama. Examine the image
that is now displayed. If the section meets your expectations, no further adjustment
is necessary, and panorama conguration is complete. To change the image section
to meet your specic expectations, continue with Step 2.
Note
The currently visible image section may dier from the desired image section due to
the installation position or any accessories in use, for example. However, it is not nec
-
essary to physically move the camera, as in this case the browser alone can be used to
adjust the visible panorama image by zooming, panning and tilting. Tilted vertical lines
may also be optically straightened to the image edges using the panorama correction
function. These tilted lines are primarily caused if the camera or sensor module is
tilted (for example, due to mounting with 15° wedges) or if the image tilt is modied.
Camera live image with
panorama correction
Camera live image
without
MOBOTIX pan-
orama correction with
Quick Controls visible
To Next Page
Loading...
