ModMAG M1000 - PIN Menu and Security Features; PIN Setup and Access Levels; Login and Logout Procedures

PIN Menu
Setting Personal Identification Numbers (PINs)
The M1000 offers three levels of access to the individual menus: Administrative, Service and User level.
The applicable security level for each menu option is indicated as follows:
A
S
U
Administrative Service User
The M1000 security feature allows the option to restrict access to the meter by way of a 6-digit Personal Identification Number
(PIN). No PINs are set at the factory. The system administrator can set up a single PIN for each of the three different levels
of access:
1. To activate password protection, navigate to the PIN menu. Set Control to ON.
2. Enter the Login menu and login using the password 000000.
3. Return to the PIN menu and enter [User], [Service] and [Admin] passwords.
Logging In
Once the password protection has been activated, enter your PIN under Login.
OTE: N The Login screen is available only after Control has been set to ON.
Once logged in, the unlock icon appears.
OTE: N A PIN Error message displays if the incorrect PIN is entered.
The PIN grants you access to either Administrator, Service or User level with the respective access rights (marked with A, S and
U in this manual). You can now move to the menu and enter your parameters.
Without a login, you can read all parameters, but cannot change them.
Logging Out
To log out, enter an incorrect PIN, then press EXIT SAVE.
PIN
Control
A
Activate and deactivate the PIN.
User
U
Users logged in with this PIN have access to user-level procedures. Users at this level do not have access
to service or admin functions.
Service
S
Users logged in with this PIN have access to both service and user-level procedures. Users at this level
do not have access to admin functions.
Admin
A
Users logged in with this PIN have access to all procedures. Users at this level have full access to
themeter.
Login Screen
Login
Login This screen is available only after the password protection (PIN Control) has been set to ON. Enter your
6-digit password.
ModMAG® M1000 Electromagnetic Flow Meter
Page 34 March 2020MAG-UM-00379-EN-07