SR5 Technical Manual TSP010.doc Issue 3.0 - October 2001
CONFIDENTIAL
Not to be disclosed without prior written permission from Money Controls
Page 5 of 50
2) Introduction
The SR5 series of coin acceptors has been designed to be compatible with the
standard 5” format currently used throughout the vending, amusement and
leisure industries.
Through the development of Series Resonance technology, the SR5
incorporates the highest levels of discrimination and functionality. Each
acceptor within the series will accept up to 16 different coins or 15 coins plus
one token.
Depending on your requirements, the SR5 series can be set-up to be backward
compatible with the C220B, C420, C435, C435 UK AWP and C450. This will be
determined by the Mode.
Mode 1 = C435
Mode 2 = C435 - BACTA Binary
Mode 3 = C420
Mode 4 = C435 - Customer Selectable Credit Codes
Mode 5 = C450/5 BDTA - 12 Coin
Mode 6 = Custom PCB
Mode 7 = C435 - Customer Selectable Credit Codes - C420 (Mode3) Inhibits
Mode 8 = C435 - Customer Selectable Credit Codes - BACTA (Mode2) Inhibits
Mode 9 = 16 coin BDTA - Custom Credit Codes - Custom Inhibits
Mode 10 = C220B
(See Manual TSP021 for further interface details).
As with all new Money Controls products other enhancements have been made
to the SR5 series as well as the new sensing technology.
These include:-
¾
cctalk serial communication.
(see appendix “SR5 cctalk”)
¾
Extended Teach and Run™ options.
(see appendix “SR5 MechTool”)
¾ Coinless programming.
¾ Adjustable coin security.
(see appendix “SR5 MechTool”)
¾ MechTool programmability.
(see appendix “SR5 MechTool”)
¾ Improved sorter coin detection.
To Next Page
Loading...
