MOTO GUZZI GRISO Use And Maintenance Book

use and maintenance Griso R
36
Back lighting
This function allows you to set
backlighting: three levels are available.
From this function, every time the SET
button (3) is briefly pressed, the following
icons are alternately displayed:
–LOW
– MEAN
–HIGH
Press the SET button (3) for several
seconds to complete the operation; the
instrument panel sets back to SETTINGS
menu.
°C/°F
This function allows you to select the unit
of measurement for ambient temperature.
From this function, every time the SET
button (3) is briefly pressed, the following
two units of measurement are alternately
displayed:
°C
°F
Press the SET button (3) for several
seconds to store the data; the instrument
panel sets back to SETTINGS menu.
12H/24H
This function allows you to select the time
format. From this function, every time the
SET button (3) is briefly pressed, the
following formats are alternately displayed:
12H
24H
Press the SET button (3) for several
seconds to store the data; the instrument
panel sets back to SETTINGS menu.
Change the code
This function is used when the old code is
available and is to be changed.
Within this function, the following message
is displayed:
"INSERT THE OLD CODE"
As soon as the old code is acknowledged,
the new code is requested; the following
message is displayed:
"INSERT THE NEW CODE"
Once the operation is over, the display
goes back to DIAGNOSIS menu. If you
entered with the code, this operation will
not be allowed.
Once the operation is over, the instrument
panel goes back to SETTINGS menu.
GUZum_griso1100#06_#USA.book Page 36 Tuesday, March 21, 2006 2:43 PM

MOTO GUZZI GRISO Specifications

General

Cooling System	Air-cooled
Final Drive	Shaft drive
Seat Height	800 mm
Engine Type	90° V-twin
Fuel System	Electronic fuel injection
Front Suspension	43mm upside-down fork
Front Brakes	Dual 320mm discs, 4-piston calipers
Frame	Tubular steel