EasyManuals Logo

MOTO GUZZI GRISO Use And Maintenance Book

MOTO GUZZI GRISO
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
35
use and maintenance Griso R
MENU
If vehicle is stopped and selector is set to
MODE, configuration menu of the MENU
page can be accessed. To enter this
function, confirm MENU selection [press
SET button (3) for several seconds].
Configuration menu options are:
EXIT
SETTINGS
LAP TIMER
DIAGNOSTICS
LANGUAGE
SETTINGS
When confirming SETTINGS selection
(pressing SET button (3) for several
seconds) the following options are
displayed:
EXIT
TIME SETTINGS
GEAR SHIFT INDICATOR
BACK LIGHTING
–°C/°F
12H/24H
CHANGE THE CODE
CODE RECOVERY
Time settings
This mode allows you to set the clock. In
this function, hours increase by one unit
every time the SET button (3) is pressed;
when value is 12 or 24, it goes back to 1 if
the SET button (3) is pressed again.
AM indication becomes PM or vice versa
when time goes from 11:59 to 12:00.
Press the SET button (3) for several
seconds to store the value and go to
minutes setting mode. Minutes increase by
one unit every time the SET button (3) is
pressed; when value is 59, it goes back to
0 if the SET button (3) is pressed again.
Press the SET button (3) for several
seconds to complete the procedure; the
instrument panel sets back to SETTINGS
menu.
Gear shift indicator
This function allows you to set the value for
the Gear shift indicator threshold. As soon
as you enter this function, the display
shows “GEAR SHIFT INDICATOR” (if
English is the selected language) and the
rev counter scale indicates the threshold
value.
Briefly press the SET (3) pushbutton to
increase threshold value by 100 RPM.
Once the top limit has been reached, press
the pushbutton again to decrease the
value.
Press the SET button (3) for several
seconds to complete the operation; the
display sets back to SETTINGS menu.
When battery is connected for the first
time, the instrument panel sets to running-
in rpm value, the next time battery is
connected it sets to last set value.
RUNNING-IN RPM: 6500
MINIMUM RPM (THAT CAN BE SET):
6000
MAXIMUM RPM (THAT CAN BE SET):
8500
When the set threshold is exceeded, the
alarm light (4) on the instrument panel
flashes until the value goes below the
threshold.
4
GUZum_griso1100#06_#USA.book Page 35 Tuesday, March 21, 2006 2:43 PM

Table of Contents

Other manuals for MOTO GUZZI GRISO

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MOTO GUZZI GRISO and is the answer not in the manual?

MOTO GUZZI GRISO Specifications

General IconGeneral
Cooling SystemAir-cooled
Final DriveShaft drive
Seat Height800 mm
Engine Type90° V-twin
Fuel SystemElectronic fuel injection
Front Suspension43mm upside-down fork
Front BrakesDual 320mm discs, 4-piston calipers
FrameTubular steel

Related product manuals