7-6 Disassembly/Reassembly Procedures: Radio Disassembly
7.4.3 Remove Multi Function Knob (6)
1. Hold the radio with the top facing upward and the front of the radio facing you.
2. With the Chassis Opener, grasp the Multi Function Knob and pull it upward, until it is free from
its shaft.
Figure 7-5. Removing the Multi Function Knob
7.4.4 Remove Accessory-Connector Cover (1)
1. Unscrew the thumb screw. If the screw is too tight, use an Allen wrench.
NOTE: Do not remove the screw. It should remain captive in the cover.
When the accessory connector is not in use, keep it covered
with the Accessory-Connector Cover.
To Next Page
Loading...
