Motorola APX NEXT

Function Description
Voice Announcement Audibly indicates the current feature mode, zone, or channel
that you are assigned to.
Voice Mute Allows you to mute the voice transmission of the current
zone and channel.
Volume Set Tone Sets the volume set tone.
Zone Bank Up Scrolls through the zone banks in ascending order.
Zone Bank Down Scrolls through the zone banks in descending order.
Zone Select Allows you to select a zone from the switch.
3.2
ViQi
ViQi is a virtual assistant that helps you manage your radio and perform information lookups using
voice commands. This feature is purpose-built for public safety and is active when you press the
assigned ViQi button on the radio or an associated Remote Speaker Microphone (RSM).
ViQi Voice Control
ViQi Voice Control allows you to operate the radio with your voice, for example, to change zones,
channels, or volume.
NOTE: Voice Control follows the language that you set in the device. If you changed the device
language in RadioCentral or Customer Programming Software (CPS), your device automatically
downloads the new language files for this feature through LTE or Wi-Fi. This feature is disabled
until the languages files are downloaded successfully. Therefore, retry if your download fails.
Table 5: ViQi Voice Control Commands
The following table shows the functions supported by the ViQi Voice Control feature and their
respective commands.
Feature Examples
Zone and Channel To identify your current zone and channel, say:
• "What is my zone and channel"
• "Current zone and channel"
• "Zone and channel"
To change to a new zone and channel, say:
• "Zone <Zone Name>, channel <Channel Name>"
• "Change zone to <Zone Name>, channel to <Channel Name>"
• "Switch zone to <Zone Name>, channel to <Channel Name>"
Zone To identify your current zone, say:
• "What is my zone"
• "Current zone"
• "Zone"
To change to a new zone, say:
MN005642A01-AN
Chapter 3 : Radio Overview
20