Why Motorola Barcode Reader emits short low/short medium/short high beep sequence?
The Motorola Barcode Reader emitting a short low/short medium/short high beep sequence indicates that the scanner is powering up. This is normal when the scanner is plugged in.
General| Corded/Cordless | Corded |
|---|---|
| Resolution | 4 mil |
| Drop Specification | Withstands multiple 6.5 ft. / 2 m drops to concrete |
| Humidity | 5% to 95% (non-condensing) |
| Voltage | 5V DC ±10% |
Provides general instructions for setting up, operating, maintaining, and troubleshooting the scanner.
Provides an overview of each chapter's content in the manual.
Describes the scanner's performance, ergonomics, and ease of use.
Step-by-step instructions for connecting the scanner's interface cable.
Details on how to program the scanner using bar codes or the 123Scan utility.
Covers beeper/LED definitions, scanning techniques, and decode zone diagrams.
Explains the various beeper sequences and their indications for scanner status.
Defines the meanings of the scanner's LED colors during operation.
Instructions on how to aim and scan using the scanner in hand-held mode.
Provides guidance on proper scanner aiming techniques for successful decoding.
Details on operating the scanner in hands-free mode using the IntelliStand.
Guides users through common scanner problems and their solutions.
Lists detailed technical specifications for the LS3408 scanner models.
Explains how to program scanner features using bar codes.
Lists the default settings for various user preference parameters.
Details the different trigger modes available for scanner operation.
Provides information for setting up the scanner for Keyboard Wedge operation.
Instructions for connecting the scanner to a host via a keyboard wedge.
Lists and explains the different host types supported by the keyboard wedge interface.
Provides information for setting up the scanner for RS-232 operation.
Details on connecting the scanner directly to a host computer via RS-232.
Explains terminal-specific RS-232 host parameter settings.
Covers the operation and configuration of hardware handshaking lines (RTS/CTS).
Provides information for setting up the scanner with a USB host.
Instructions for connecting the scanner to a USB host or hub.
Selects the desired USB device type for scanner operation.
Provides information for setting up the scanner with an IBM 468X/469X host.
Details on connecting the scanner to IBM 46XX host systems.
Sets the IBM 468X/469X port used for scanner communication.
Provides information for setting up the scanner with a Wand Emulation host.
Instructions for connecting the scanner to a portable terminal or POS terminal.
Lists and describes the different host types supported by Wand Emulation.
Provides information for setting up the scanner with a Scanner Emulation host.
Details on connecting the scanner to a mobile computer or controller.
Configures the beep behavior for scanner emulation.
Introduces the 123Scan program and its capabilities.
Explains how to enable the 123Scan interface on the scanner.
Describes symbology features and programming bar codes.
Lists the default settings for all symbologies parameters.
Covers enabling/disabling Code 39 and related settings.
Details settings for the Interleaved 2 of 5 symbology.
Covers MSI symbology settings, including lengths and check digits.
Explains GS1 DataBar variants and conversion options.
Defines four levels of decode security for UPC/EAN bar codes.
Details features for customizing data transmission to the host device.
Lists the default settings for miscellaneous scanner options.
Allows customization of how scanned data is transmitted to the host.
Explains Advanced Data Formatting (ADF) for customizing scan data.
Describes how ADF rules customize data based on criteria and actions.
Lists code types that can be affected by ADF rules.
Defines the number of characters required for selected code types.
Provides actions to modify scanned data within ADF rules.
Allows padding data to a specific length with spaces.
Lists default parameters for user preferences.
Lists default parameters for keyboard wedge host types.
Provides a table of code characters and their corresponding code types.
Explains AIM code identifiers and their structure.
Details modifier characters used in programming reference tables.
To Next Page