Chapter 1 Getting Started
Introduction
This chapter lists the accessories for the MC9090-G RFID mobile computer and explains how to install and charge
the batteries, replace the strap and start the mobile computer for the first time.
MC909X Integrator Guide
The MC909X Integrator Guide, P/N: 72E-72216-xx provides the following support information applicable to the
MC9090-G RFID mobile computer:
•
Accessories; describes the accessories available for the mobile computers and how to set up power
connections and battery charging capabilities, where applicable.
•
ActiveSync; provides instructions on installing ActiveSync and setting up a partnership between the mobile
computer and a host computer.
•
Wireless Applications; provides instructions using and configuring the mobile computer on a wireless
network.
•
Wireless Applications; describes how to configure the WLAN wireless connection.
•
Rapid Deployment Client; explains how to use the Rapid Deployment Client to facilitate software
downloads to the mobile computer from a Mobility Services Platform (MSP) Console FTP server.
•
AirBEAM Client; explains how to set up the mobile computer to synchronize with a server using the
AirBEAM® Client and AirBEAM Staging applications.
•
Application Deployment for Windows Mobile; provides instructions for installing the SMDK for C and
SMDK for .NET on the host computer.and downloading software and files to the mobile computer.
•
Maintenance & Troubleshooting; includes instructions on cleaning and storing the mobile computer, and
provides troubleshooting solutions for potential problems during mobile computer operation.
NOTE This MC9090-G RFID Integrator Guide Supplement is intended as a supplement to the MC909X
Integrator Guide, P/N: 72E-72216-xx. Procedures common to the MC909X series of products are
referenced to the MC909X Integrator Guide.
To Next Page
Loading...
Need help?
General
