GeminiRFID Demo Application 5 - 7
About
Tap File - About to view the application version number, the RFID DLL version number, the RFID reader module
firmware version number, date code, and serial and port information.
Figure 5-3
RFID - About Window
Log
Tap File - Log to display the Log menu.
Figure 5-4
RFID - Log Menu
From the Log menu, tap:
•
Clear Log to clear logged data.
•
Log On turns on the log feature. With this feature is turned on, the display splits into two sections: upper and
lower. The lower section displays all communication to the RFID radio module, including tag data.
•
Log Off to turn off the log feature. Log Off is the default.
•
Log File to create and save a log file. The log file is saved in the root directory on the mobile computer to a
file named RXTXLog.txt. This file can be used to track errors reading RFID tags.
Reboot
Tap File - Reboot to issue a (warm) reboot command to the RFID radio module.
NOTE Reboot the RFID radio module only if tags are not being read.
To Next Page
Loading...
Need help?
General
