RFID Demo Application 4 - 19
ETSI EN 302-208 Tx-Channel Selection
The ETSI EN302-208 Tx-Channels window is only available on MC9090 EU specification EN302.208 products. A
reader operating within the specification parameters may operate on any (or all) of the four available channels. By
default all 4 channels will be selected. To select channel(s) select the check box as shown in Figure 4-12.
Tap File->ETSI EN302-208 Tx-Channels, the ETSI EN302-208 Tx-Channels selection window appears.
Figure 4-12
ETSI EN302-208 Tx-Channels Window
To Next Page
Loading...
