ABOUT THIS GUIDE
Introduction
The MX101 Product Reference Guide provides general instructions for setting up, operating, maintaining, and
troubleshooting the MX101 digital scanner.
Configurations
MX101-SR00004ZZWR- Customer Side Scanner
Chapter Descriptions
Topics covered in this guide are as follows:
•
Chapter 1, Getting Started provides information about the scanner’s features, and setting up, installing, and
configuring the digital scanner.
•
Chapter 2, Data Capture provides beeper and LED definitions, techniques involved in capturing bar codes,
general instructions and tips about scanning, and decode range information.
•
Chapter 4, User Preferences & Miscellaneous Options describes features frequently used to customize how
data transmits to the host device and programming bar codes for selecting user preference features for the
decoder.
•
Chapter 3, USB Interface describes how to set up the decoder with a USB host.
•
Chapter 5, Symbologies describes all symbology features and provides programming bar codes for selecting
these features for the decoder.
•
Chapter 6, 123Scan2 describes this PC-based scanner configuration tool which enables rapid and easy
customized setup of Symbol scanners.
•
Chapter 7, Advanced Data Formatting briefly describes ADF, a means of customizing data before
transmission to the host device, and includes a reference to the ADF Programmer Guide.
•
Chapter 8, Installing the MX101 Customer Side Scanner provides the steps to install the MX101 into the
MP6000, and affix the MX101 identification label.
To Next Page
Loading...
