CHAPTER 9 MAINTENANCE,
TROUBLESHOOTING, AND
SIGNAL DESCRIPTIONS
Introduction
This chapter provides suggested digital scanner maintenance, troubleshooting, and pinout signal descriptions.
Maintenance
Cleaning the scan window is the only maintenance required. A dirty window can affect scanning accuracy.
•
Do not allow abrasive material to touch the window.
•
Remove any dirt particles with a damp cloth.
•
Wipe the window using a dust-free soft cloth moistened with isopropyl alcohol-based cleaner. Do not let
liquid pool around the window or any other area on the scanner.
•
Do not spray water or other cleaning liquids directly into the window.
To Next Page
Loading...
