Motorola MX101 - Aztec; Aztec Inverse

Symbologies 5 - 83
Aztec
Parameter # F1h 3Eh
To enable or disable Aztec, scan the appropriate bar code below.
Aztec Inverse
Parameter # F1h 4Dh
This parameter sets the Aztec inverse scanner setting. Options are:
• Regular Only - the scanner decodes regular Aztec bar codes only.
• Inverse Only - the scanner decodes inverse Aztec bar codes only.
• Inverse Autodetect - the scanner decodes both regular and inverse Aztec bar codes.
Enable Aztec
(01h)
*Disable Aztec
(00h)
Regular
(00h)
Inverse Only
(01h)
*Inverse Autodetect
(02h)