Wireless Applications 5 - 35
Band Selection
The Band Selection settings identify the frequency bands to scan when finding WLANs. These values refer to the
802.11 standard networks.
Figure 5-45
Band Selection Dialog Box
1. Press TAB to highlight the 2.4 GHz Band check box. Press Blue - BKSP to enable or disable the check box.
2. Press TAB to highlight the 5 GHz Band check box. Press Blue - BKSP to enable or disable the check box.
3. Press TAB to highlight Save and then press ENTER to save the settings or press ESC to discard any changes.
4. Press ESC to exit the Options dialog box.
System Options
Use System Options to set miscellaneous system setting.
Figure 5-46
System Options Dialog Box
NOTE Select one band for faster access when scanning for WLANs.
Table 5-25
Band Selection Options
Field Description
2.4GHz Band The Find WLANs application list includes all networks found in the 2.4 GHz band (802.11b
and 802.11g).
5GHz Band The
Find WLANs application list includes all networks found in the 5 GHz band (802.11a).
To Next Page
Loading...
