Motorola WT4090 - Creating a New Profile; Deleting a Profile; Ordering Profiles; Export a Profile

5 - 24 WT4070/90 Wearable Terminal Integrator Guide
profile. Use the Profile Wizard to edit the profile power consumption and security parameters. See Profile Editor
Wizard on page 4-6.
Creating a New Profile
To create new profiles from the Manage Profiles window, press Blue key - TAB (Menu).
Figure 5-31 Manage Profiles - Add
Select
Add and press ENTER to display the Profile Wizard wherein you can set the profile name and ESSID. Set
security, network address information, and power consumption level for the new profile.
Deleting a Profile
To delete a profile from the list, use the navigation keys to select a profile and then press Blue key - TAB (Menu) to
open the pop-up menu. Select
Delete and then press ENTER. A confirmation dialog box appears.
Ordering Profiles
To order the profile, select a profile using the navigation keys and press Blue key - TAB (Menu) to open the pop-up
menu. Select
Move Up or Move Down from the pop-up menu and press ENTER. If the current profile association is
lost, the wearable terminal attempts to associate with the first profile in the list, then the next, until it achieves a new
association.
Export a Profile
To export a profile to a registry file, select a profile using the navigation keys and press Blue key - TAB (Menu).
Select
Export from the pop-up menu and press ENTER. The Save As dialog box displays with the Application folder
and a default name of WCS_PROFILE{profile GUID}.reg (Globally Unique Identifier).
Figure 5-32 Save As Dialog Box
NOTE Profile Roaming must be enabled.