Motorola WT4090 - Accepting a Bond

6 - 18 WT4070/90 Wearable Terminal Integrator Guide
6. Use the arrow keys to select a device from the list and press ENTER. The PIN Code Request window
appears.
Figure 6-24 Connection Favorite Options Window
7. In the PIN Code field, enter the PIN code.
8. Press ENTER. The Pairing Status window displays.
Figure 6-25 Pairing Status Window
9. Press P2. The devices are successfully paired. The device name moves to the Trusted Devices window.
Accepting a Bond
When a remote device wants to bond with a wearable terminal, you give permission by entering a PIN when
requested.
1. Ensure that the wearable terminal is set to discoverable and connectable. See Bluetooth Settings on page
6-23.
2. When prompted to bond with the remote device the PIN Code Request window appears.
NOTE To filter devices in the list press ALT - F to open the filter menu. Select a device type and then press ENTER.
To change the display view press ALT - V to open the view menu. Select a view type and then press ENTER.