EasyManua.ls Logo

Motorola WT4090 - Put File; Connect to Internet Using Access Point

Motorola WT4090
206 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Using Bluetooth 6 - 13
4. Press TAB three times to enter the folder area.
5. Using the navigation keys to highlight a folder and press ENTER. The OBEX Object Push window appears.
6. Press ENTER. The file is transferred from the remote device to the wearable terminal.
Put File
To copy a file from the wearable terminal to a remote device:
1. In the File Transfer window, navigate to a folder where the file will be put into.
2. Press MENU to open the pop-up menu.
3. Use the navigation keys to select Put.
4. Press ENTER. The Send Local File window appears.
Figure 6-16
Send Local File Window
5. Press TAB three times to enter the folder area.
6. Select a file in the wearable terminal.
7. Press ENTER. The Sending Local File window appears.
Figure 6-17
Sending Local File Window
8. The file is transferred from the wearable terminal to the remote device.
Connect to Internet Using Access Point
This section explains how to access a Bluetooth-enabled LAN access point (AP) for a network connection. With
this method of communication the Internet Explorer can be used to connect to a server.
1. In the Favorite window, use the navigation keys to select the LAN Access service.
2. Press MENU and select Connect from the pop-up menu.

Table of Contents

Other manuals for Motorola WT4090

Related product manuals