Application Deployment 7 - 17
IPL Error Detection
While receiving data, IPL performs many checks on the data to ensure that the data is received correctly. If an error
is detected, IPL immediately aborts the download, and reports the error on an error screen on a WT4070/90 or with
the LEDs on a Voice Only WT4090.
WT4070/90 Error Indications
Error screens may vary depending on the action being performed. A sample error screen may look like the screen
pictured below:
Figure 7-16
IPL Error Screen
INVALID DIRECTORY In Script Properties window, the selected System File Path is not a valid directory.
One of the disk sizes is one
sector in size
In Script Properties window, one of the disks is too small (one sector in size). This
may cause problem while building images, especially when cushion is enabled.
Increase the disk size.
INVALID VOLUME NAME In Script Properties window, one of the volume labels is not valid.
Corrupt TCM.INI file!
(Invalid value of
VolumeDivisor)
The VolumeDivisor entry is missing or invalid in the TCM.ini. Reinstall TCM or recover
TCM.ini.
Invalid version of TCM
script file
The TCM script was not created by this version of TCM.
Corrupt or missing TCM.ini
file
TCM could not find TCM.ini file.
FAILED CONNECTION TO
COM PORT (Could not get
status)
While downloading images to wearable terminal, TCM failed to connect to the
selected COM port. Check if the COM port is free and is properly configured.
FAILED CONNECTION TO
TERMINAL (Terminal Not
Connected
Properly/Terminal Not
Ready to Receive)
While downloading images, TCM failed to connect to the wearable terminal. Check if
the correct flow control protocol is selected and the wearable terminal is properly
connected and is in a listening state.
Table 7-3
TCM Error Messages (Continued)
Error Description/Solution
Downloading:
Platform
via Serial Port 115200
Error # -2: Messages:
Cancelled by user
Press any key to continue
To Next Page
Loading...
