Wireless Applications 5 - 11
Figure 5-9
Credentials Dialog Box
3. Enter the User:, Pwd: (password), and Server: information in their respective text boxes. Press TAB to move to
each field.
4. Press TAB to highlight the Retrieve button.
5. Press ENTER. A Progress dialog indicates the status of the certificate retrieval.
6. Press ENTER exit.
After the installation completes, the
Installed User Certs dialog box displays and the certificate is available in the
drop-down list for selection.
Server Certificate Selection
If you select the Validate Server Certificate check box, a server certificate is required. Select a certificate on the
Installed Server Certificates dialog box. An hour glass may appear as the wizard populates the existing certificate
list. If the required certificate is not listed, install it:
1. Press TAB to highlight the Install Certificate button.
2. Press ENTER.
Figure 5-10
Installed Server Certificates Dialog Box
A dialog box appears that lists the currently loaded certificate files found in the default directory (Application)
with the default extension.
NOTE To successfully install a user certificate, the wearable terminal must already be connected to a network
from which the server is accessible.
To Next Page
Loading...
