6 - 30 WT4070/90 Wearable Terminal Integrator Guide
Figure 6-43
COM Port Connection
HID Tab
Use the HID tab to set key repeat settings.
Figure 6-44
BTExplorer Settings - HID Tab
Miscellaneous Tab
Use the Miscellaneous tab to set
Figure 6-45
BTExplorer Settings - Miscellaneous Tab
NOTE The HID tab only appears if HID is selected in the Bluetooth Profile Selector application. See Bluetooth
Profiles on page 6-4 for more information.
Table 6-11
HID Tab
Field Description
Enable Key Repeat Enable the
Delay
and
Rate
settings.
Delay Sets the amount of time that elapses before a character repeats when you
hold down a key.
Rate Sets the speed at which a character repeats when you hold down a key.
To Next Page
Loading...
