Using Bluetooth 6 - 23
Bluetooth Settings
Use the BTExplorer Settings window to configure the operation of the BTExplorer application. To access the
settings, press ALT - T, use the navigation keys to select Settings. Press ENTER. The BTExplorer Settings
window appears.
Use the left and right arrows to move from one tab to the next. Within a tab, use the TAB key to move from one field
to the next.
Device Info Tab
Use the Device Info tab to configure the wearable terminal’s Bluetooth connection modes.
Figure 6-31
BTExplorer Settings - Device Info Tab
Press TAB to move to the next field.
Services Tab
Use the Services tab to management of the services the wearable terminal makes available for use by other
Bluetooth devices.
Table 6-3
Device Info Tab
Field Description
Device Name Displays the name of the wearable terminal. Not editable.
Discoverable Mode Allows you to set the wearable terminal to be discoverable by other Bluetooth devices or not
be discoverable.
Note:
For security reasons, the default is set to
Non Discoverable
.
Connectable Mode Allows you to set the wearable terminal to be connectable by other Bluetooth devices or not
be connectable.
Note:
For security reasons, the default is set to
Non Connectable
.
NOTE For security reason, by default services are not enabled.
To Next Page
Loading...
