Wireless Applications 5 - 15
Figure 5-17
Password Dialog Box
1. Enter a password in the Password field.
2. Press TAB to highlight the Advanced ID check box.
3. Press ALT > BKSP (SPACE) to select the Advanced ID check box, if advanced identification is required.
4. Press TAB twice to highlight the Next button.
5. Press ENTER. The Encryption dialog box displays. See Encryption on page 4-17.
Advanced Identity
Use the Advanced ID dialog box to enter the 802.1X identity to supply to the authenticator. This value can be 63
characters long and is case sensitive. In TTLS and PEAP, it is recommended entering the identity anonymous
(rather than a true identity) plus any desired realm (e.g., anonymous@myrealm). A user ID is required before
proceeding.
Figure 5-18
Advanced Identity Dialog Box
1. Enter the 802.1x identity information in the 802.1x Identity field.
2. Press TAB.
3. Enter the domain name in the Domain field.
4. Press TAB twice to highlight the Next button.
5. Press ENTER. The Encryption dialog box displays.
Encryption
Use the Encryption dialog box to select an encryption type. The drop-down list includes encryption types available
for the selected authentication type. See Table 5-10 for these encryption types.
1. Use the navigation keys to select an encryption type.
If
40-Bit WEP or 128-Bit WEP are selected, the Key Index and Use Passkey fields appear.
NOTE When authenticating with a Microsoft IAS server, do not use advanced identity.
To Next Page
Loading...
