7 - 8 WT4070/90 Wearable Terminal Integrator Guide
Figure 7-4
Script Properties Window - Partition Data Tab
3. In the Terminal drop-down list, select the terminal type.
4. Use the default Flash Type.
5. In the Disks drop-down list, select the number of disk partitions to create.
6. Select the (memory) Size for each partition. Note that adding space to one disk. partition subtracts it from
another.
7. In the Access drop-down list for each disk partition, determine and select the Read/Write access option.
8. Click the Options tab. The Script Properties window Options tab appears.
Figure 7-5
Script Properties Window - Options Tab
9. Set the paths for the Script File, Flash File and Hex File Build.
10. Click OK.
Creating the Script for the Hex Image
On start-up, TCM displays the TCM window with the Script1 window and File Explorer window pointing to the
following directory:
\Program Files\Symbol Device Configuration Packages\MC40x0c\v0.1\TCMScripts\
To Next Page
Loading...
