Motorola WT4090 - Microsoft Activesync Remote Display Connection

ActiveSync 4 - 3
Figure 4-2 Remote Control Window with Voice Only WT4090 Desktop
3. Use the host computer mouse to control the Voice Only WT4090 desktop.
4. When finished, close the Remote Control and Run Remote Control windows.
Microsoft ActiveSync Remote Display Connection
To control the Voice Only WT4090 using the Microsoft ActiveSync Remote Display software:
1. On the host computer, click Start > Programs > ActiveSync Remote Display. The ActiveSync Remote
Display window displays with the Voice Only WT4090 desktop shown.
Figure 4-3 ActiveSync Remote Display Window
2. Use the host computer mouse to control the Voice Only WT4090 desktop.
3. When finished, close the ActiveSync Remote Display window.