5 - 18 WT4070/90 Wearable Terminal Integrator Guide
Figure 5-21
Passkey Dialog Box
1. Enter the passkey in the Passkey text box.
2. Press TAB twice to highlight the Next button.
3. Press ENTER. The IP Address Entry dialog box displays.
IP Address Entry
Use the IP Address Entry dialog box to configure network address parameters: IP address, subnet, gateway, DNS,
and WINS.
Figure 5-22
IP Address Entry Dialog Box
1. Use the navigation keys to select either DHCP or Static from the drop-down list.
2. Press TAB twice to highlight the Next button.
3. Press ENTER.
Selecting
Static IP displays the IP Address Entry dialog box. Selecting DHCP displays the Transmit Power dialog
box.
Use the
IP Address Entry dialog box to enter the IP address and subnet information.
Table 5-12
IP Address Entry
Encryption Description
DHCP Select Dynamic Host Configuration Protocol (DHCP) from the IP Address Entry drop-down
list to obtain a leased IP address and network configuration information from a remote
server. DHCP is the default setting for the wearable terminal profile. When DHCP is
selected, the IP address fields are read-only.
Static Select
Static to manually assign the IP, subnet mask, default gateway, DNS, and WINS
addresses the wearable terminal profile uses.
To Next Page
Loading...
