1 - 10 WT4070/90 Wearable Terminal Integrator Guide
1. Select Start > Settings > Control Panel > Keylight icon > Battery Power tab.
2. Press ENTER.
3. Select the On battery power: Disable keylight if not used for: check box and select a value from the drop-down
list box.
4. Select the Advanced tab.
5. Select the Disable keylight check box to completely turn off the keypad backlight.
6. Press ENTER.
Turning the WLAN Radios Off
To turn off the WLAN radio:
1. Press ALT - w. The Wireless menu appears.
2. Select Disable Radio.
3. Press ENTER.
To turn on the radio:
1. Press ALT - w. The Wireless menu appears.
2. Select Enable Radio.
3. Press ENTER.
Long Term Storage
When storing the wearable terminal for a long period of time it is recommended to place the wearable terminal in
storage mode.
1. Remove the main battery.
2. On the WT4070/90, press and simultaneously hold the 1, 9 keys and Power button (cold boot).
or
On the Voice Only WT4090, press and simultaneously hold the P
1 and P2 keys and the Power button (cold
boot).
3. Release the keys and Power button.
When returning the wearable terminal to everyday operation, install a fully charged main battery.
NOTE To navigate using the keypad refer to the WT4070/90 Wearable Terminal User Guide.
To Next Page
Loading...
