7 - 18 WT4070/90 Wearable Terminal Integrator Guide
This error message screen displays until you press any key. Once the screen is acknowledged, IPL returns to the
Initial Program Loader main menu to wait for a new selection.
To find the probable cause of the error, use the error number and/or the error text displayed on the screen to look
up the error in Table 7-4.
Table 7-4
IPL Errors
Error Text
Error
Number
Probable Cause
Unknown error -1 A general error occurred. Retry the download. If the failure persists, it is
most likely due to a hardware failure; the wearable terminal requires
servicing.
Cancelled by user -2 The user canceled the download.
Can't open the source -7 An error occurred opening the source device (either radio card or Serial
port). Check source device connectivity and retry.
Can't open the
destination
-8 An error occurred opening the destination device (either flash ROM or
Power Micro). Retry the download. If the failure persists, it is most likely
due to a hardware failure; the wearable terminal requires servicing.
Can't read from the
source device
-9 The source device (either radio card or Serial port) could not be read
from. Check source device connectivity and retry.
Can't write to the
destination device
-10 The destination device (either flash ROM or Power Micro) could not be
written to. Retry the download. If the failure persists, it is most likely due
to a hardware failure; the wearable terminal requires servicing.
Transmission checksum
error
-11 An error occurred during transmission from the source device (either
radio card or Serial port) and the checksum check failed. Check source
device connectivity and retry.
Readback checksum
error
-12 A checksum, generated from reading back data that was written to the
destination device, was incorrect. An error during transmission or a write
error to the destination device could cause this.
There is no more heap
space available
-14 There is no more heap space available for the download procedure.
Restart IPL and retry the download. If the failure persists, contact
service with details of what is being downloaded.
Insufficient data
available to complete
record
-21 A Symbol HEX file download was attempted but the HEX file is invalid.
Ensure the file is in Symbol HEX file format.
Invalid Symbol HEX file -23 A Symbol HEX file download was attempted but the HEX file is invalid.
Ensure the file is in Symbol HEX file format.
Unrecognized or
unsupported HEX
record
-24 The Symbol HEX file being downloaded contains an invalid or
unrecognized HEX record. Ensure the file is in proper Symbol HEX file
format.
Invalid data in HEX file -25 The Symbol HEX file being downloaded contains invalid data. Ensure
the file is in proper Symbol HEX file format with valid HEX data.
To Next Page
Loading...
