Motorola WT4090 - Page 111

Using Bluetooth 6 - 5
5. The ProfileSelector window appears.
Figure 6-3 Bluetooth Profile Selector Window
6. Use the navigation keys to highlight a profile. Press the SPACE key to select the profile.
or press TAB to place focus on the Select All button to select all profiles or the Deselect All button to deselect
all profiles.
7. Press TAB to place focus on the Apply button.
8. Press Space or ENTER to apply any changes.
9. Press TAB to place focus on the Close button.
10. Press Space to exit Profile Selector.
11. Press ALT - B. Use the navigation keys to select Enable Bluetooth to enable the BTExplorer application.
See Services Tab on page 6-23 for more information on selecting services.
NOTE The Serial Port profile is always active and cannot be removed.