Application Deployment 7 - 13
5. Use the up and down scroll buttons to select USB and press Enter. If this is the first time using USB transport,
you might need to install the Zebra USB driver. Follow the screen prompts.
6. The USB Configuration menu appears.
7. Select USB Standard and press ENTER. The Download File? menu appears.
Figure 7-11
Download File? Menu
8. Use the up and down scroll buttons to select Show Parms to verify the file to download. Press ENTER to display
the
Parameters screen.
USB Configuration
USB Standard
Previous
Top
Download File?
Download
Cancel
Show Parms
Previous
Top
To Next Page
Loading...
