A - 8 WT4070/90 Wearable Terminal Integrator Guide
Supported Symbologies 1D enabled by default:
Codabar, Code 39, Code 128, EAN-13, EAN-8, Interleaved 2 of 5, UPC-A and
UPC-E.
Additionally supported by 1D:
Code 11, Code 32 Pharmaceutical (PARAF), Code 93, MSI, Reduced Space
Symbology (RSS-14, RSS Limited, RSS Expanded), Straight 2 of 5 IATA (two-bar
start/stop), Straight 2 of 5 Industrial (three-bar start/stop), Trioptic, UPC-E1.
2D enabled by default:
4-CB (4-State Customer Bar code), Aztec, MicroPDF417, PDF417, MaxiCode.
Additionally supported by 2D:
Australian Post, British Post (4 state code and “infomail”), Data Matrix, Japanese
Post, KIX (Netherlands) Post, Planet Code, Postnet, QR Code, EAN/UCC
Composite, TCIF Linked Code 39 (TLC39).
Supported Aiming Modes Class 2 Laser, cross hair with bright center for sunlight visibility; Pick List mode
option.
Interface Cordless:
Bluetooth: Class II, v 2.1 with Adaptive Frequency Hopping (AFH).
Supported profiles: Serial Port Profile (SPP), Human Interface Device Profile (HID),
Service Discovery Application Profile (SDAP).
Pairing: by reading terminal BT address as bar code off the display or from a printed
label.
Corded (to WT4090): Serial.
Field Replaceable Parts Batteries, corded adaptor, trigger clamp, triggerless clamp, comfort pad, straps and
strap buckle.
User Interface
LED Two (parallel), multi color, rear left and rear right.
Beeper Rear center, up to 80 dBA SPL @ 10 cm.
Restore Key User accessible for emergency boot up and Bluetooth reconnect (after excessive
disconnection period).
Scan Triggering Manual or automatic using Interactive Sensing Technology (IST).
User Environment
Operating Temperature -20 °C to 55 °C (-4 °F to 131 °F)
Storage Temperature -40° to 70° C (-40° to 158° F) excluding battery
-40° to 60° C (-40° to 140° F) including battery
Humidity 5% to 85% non condensing
Drop Specification 1.8 m (6 ft.) multiple drops to concrete across operating temperature range.
Table A-4
RS507 Technical Specifications (Continued)
Item Description