Motorola WT4090 - Installing and Removing the Main Battery

Getting Started 1 - 3
Figure 1-3 Wearable Terminal Back View
Table 1-1 Parts of the Wearable Terminal
Item Description
Display Displays the application and data stored on the device. (WT470/090 only)
Power Button Places the
wearable terminal in to the suspend mode or resumes normal operation.
Performs a warm boot when held down for five seconds. See
Resetting the Wearable
Terminal on page 2-17
for information about performing a warm boot.
Charge Status LED By default, indicates the charging status of the battery.
WLAN Status LED By default, indicates the status of the wireless connection. (Voice Only WT4090 only)
Battery Indicator LED By default, indicates when the battery charge level falls below 30%. (Voice Only
WT4090 only)
Application LED Application programmable. (Voice Only WT4090 only)
Speaker Provides audio playback.
Keypads Enable user input.
Battery Provides power to the wearable terminal.
Interface Connector Provides electrical connection to an accessory, such as a scanner.
Cradle Connector Provides electrical connection to a cradle.
Battery Release Releases the battery for removal.
Cleat Provides mounting for the wrist mount and cradles.
Battery
Interface Connector
Rubber Plug
Interface Connector
(shown without Rubber Plug)
Cradle Connector
Cleat
Battery Release