Motorola WT4090 - Page 48

2 - 18 WT4070/90 Wearable Terminal Integrator Guide
Figure 2-16 Cable Routing
10. Use one tie-wrap to secure the AC line cord and Ethernet cable to the mounting bracket.
11. Use two tie-wraps to secure the charger power lead, the AC line cord and Ethernet cable (if required) together
as shown below.
Figure 2-17 Routing Cables
12. Plug the AC line cord into an AC power source.
Cradle Power Plug
Right Cable Slot
Charger
Power Plug
Tie-Wraps
Ethernet Cable Plug
AC Line Cord
Tie-Wraps
Tie-Wrap
Charger Power Lead
Ethernet Cable