ActiveSync 3 - 5
Figure 3-6
ActiveSync Connected Window
During the first synchronization, information stored on the wearable terminal is copied to the host computer. When
the copy is complete and all data is synchronized, the wearable terminal can be disconnected from the host
computer.
For more information about using ActiveSync, start ActiveSync on the host computer, then see ActiveSync Help.
NOTE The first ActiveSync operation must be performed with a local, direct connection. To retain partnerships
after a cold boot, capture partnership registry information in a .reg file and save it in the Flash File System,
See the detailed information provided in the SMDK Windows Help File.
To Next Page
Loading...
