Mpio FG200 - Setting System; Saving Auto Play Settings; Setting Resume

Setting System
74 75
Setting Fade in
Select System in the menu.
1
Push the lever in + / - directions to select Fade In and then, push the lever in
direction or
press it to enter.
2
3
Push the lever in + / - directions to turn Fade In On or Off and then, push the lever in
direction
or press it to save. After saving, the device will return to its previous menu.
On: When the music begins, the volume will increase steadily from low.
Off: When the music begins, it will be played in the original volume.
Fade in setting increase the music volume steadily so that the user is not surprised by
the loud music.
Setting Playback Speed
Select System in the menu.
1
Push the lever in + / - directions to select Speed and then, push the lever in
direction or press it to enter.
2
3
Push the lever in + / - directions to select the playback speed and then, press the lever in
direction
toward OK to save. Pressing the lever shortly will also save the setting. After saving, the device will return to
its previous menu.
Note
●
Canceling playback speed settings
Push the lever in
direction and move to the EXIT to cancel the playback speed settings.
●
The playback speed can be adjusted from 50% to 200%.
●
The higher percentage represents increased speed. The default setting of 100% is recommended for listening
to music.

Ststem
1. Auto Play
2. Resume
3. Fade In
Fade In
Off
On

System
4. Speed
5. Erase
6. Sleep
Speed
100%
Usage