14-6. Operation Mode & Display
Below is only contained LCD display for grid-tie with backup mode (I). If you need
to know other operation mode with LCD display, please check with installer.
Inverter mode with grid connected
This inverter is connected to grid and working with DC/INV operation.
PV power is sufficient to charge
battery, provide power to loads, and
then feed in to the grid.
PV power is sufficient to charge the
battery first. However, remaining PV
power is not sufficient to back up the
load. Therefore, remaining PV power
and the utility are supplying power to
the connected load.
To Next Page
Loading...
Need help?
General