83
Device Mode
On the top of screen, there is a dynamic power flow chart to show live operation. It
contains five icons to present PV power, inverter, load, utility and battery. Based on your
inverter model status, there will be【Standby Mode】,【Line Mode】,【Battery Mode】.
【Standby Mode】Inverter will not power the load until “ON” switch is pressed.
Qualified utility or PV source can charge battery in standby mode.
【Line Mode】Inverter will power the load from the utility with or without PV charging.
Qualified utility or PV source can charge battery.
【Battery Mode】Inverter will power the load from the batter with or without PV
charging. Only PV source can charge battery.
To Next Page
Loading...
