MR TAPCON 230 Expert - Page 91

9 Operation
Maschinenfabrik Reinhausen GmbH 2021 917817454/02 EN TAPCON
®
230 Expert
▪ Active: You can activate or deactivate the user. Deactivated users cannot
log in. The user data is still stored in the device.
▪ Auto login: You can activate the Auto-login function for a user. This user is
automatically logged in when the system is restarted or another user logs
out.
You can only create, edit, and delete users if you are assigned an adminis-
trator role.
When in delivery status, you can log in as the administrator as follows:
▪ User name: admin
▪ Password: admin
Creating users
1. Go to Settings > Administration > User.
2. Press the Create user button.
3. Enter the user name once and the password twice.
4. Select the role you want.
5. If necessary, activate the Group account, Active or Auto login options.
6. Press the Accept button to save the user.
Editing users
1. Go to Settings > Administration > User.
2. Select the desired user in the list.
3. Make the amendments desired.
4. Press the Accept button to save the user.
Deleting a user
1. Go to Settings > Administration > User.
2. Select the desired user in the list.
3. Press the Delete user button.
4. Press the Accept button to delete the user.
9.1.11.4 Setting access rights to parameters and events
You can configure access rights to parameters and events for the available
roles. Available options:
▪ Read: Parameter/event may be displayed.
▪ Write: Parameter/event may be modified.
▪ Acknowledge: Event may be acknowledged.