Installation 4-7DXL5000 User and Technical Manual
Table 4-1: Transmitter Rear Panel Connections
Connector Type Function Comments
MGMT RJ-45 connector
Provides 10 Base T Ethernet
connection via your web browser to a
PC at a local or remote location for
control of the unit.
See ”MGMT Connections” on
page 4-10 for pin-outs.
IF IN 75 ohm BNC female connector Provides 70 MHz IF input to the unit.
SUMMARY ALARM 15-pin female D-connector Provides summary alarm data for
common faults and events
See ”SUMMARY ALARM
Connections” on page 4-10 for pin-
outs.
CHAN1 DATA RJ-45 connector Provides 10/100 Base T Ethernet
connections to the unit.
See ”CHAN1 and CHAN2 DATA
Connections” on page 4-11 for pin-
outs.
CHAN2 DATA RJ-45 connector Provides 10/100 Base T Ethernet
connections to the unit.
See ”CHAN1 and CHAN2 DATA
Connections” on page 4-11 for pin-
outs.
CHAN1 T1/E1 RJ-45 connector Provides Channel 1 T1/E1 inputs to the
unit.
See ”CHAN1 and CHAN2 T1/E1
Connections” on page 4-10 for pin-
outs.
CHAN2 T1/E1 RJ-45 connector Provides Channel 1 T1/E1 inputs to the
unit.
See ”CHAN1 and CHAN2 T1/E1
Connections” on page 4-10 for pin-
outs.
ASI/DS3/E3 1 75 ohm BNC female connector Provides ASI or DS3/E2 inputs to the unit.
ASI/DS3/E3 2 75 ohm BNC female connector Provides ASI or DS3/E2 inputs to the unit.
RF OUT SMA 50 ohm female connector Provides connection from the internal RF
circulator to the external antenna.
ASI/SMPTE310 75 ohm BNC female connector Provides ASI or SMPTE310 inputs to the
unit.
To Next Page
Loading...